Why Is My Vape Spitting? Causes and Simple Fixes
Share
Why Is My Vape Spitting?
If your vape is spitting hot e-liquid when you inhale, it can be uncomfortable and frustrating. Vape spitting occurs when small droplets of e-liquid pop or spit through the mouthpiece during vaping.
This usually happens when excess liquid collects inside the coil chamber and heats up too quickly.
The good news is that vape spitting is a common problem and can usually be fixed with a few simple adjustments.
1. Flooded Coil
The most common reason for vape spitting is a flooded coil. When too much e-liquid enters the coil chamber, it cannot vaporise properly.
Instead, the liquid heats rapidly and spits through the mouthpiece.
How to fix it
Remove the tank and gently blow through the mouthpiece while holding a tissue over the airflow holes. This helps remove excess e-liquid from the coil chamber.
2. Over-Priming the Coil
When installing a new coil, it’s important to prime it properly. However, adding too much e-liquid during priming can sometimes flood the coil.
How to fix it
If you suspect the coil is over-primed:
-
Take a few short puffs without activating the device
-
Let the coil absorb the liquid naturally
3. Low Wattage Settings
Using wattage that is too low can prevent the coil from vaporising e-liquid efficiently. This allows liquid to accumulate in the chamber.
When the liquid finally heats up, it may spit through the mouthpiece.
How to fix it
Check the recommended wattage range printed on your coil and adjust your device settings accordingly.
Increasing the wattage slightly may help eliminate spitting.
4. Condensation Inside the Mouthpiece
Condensation can build up inside the mouthpiece over time. When you inhale, this condensation may be pulled into your mouth, giving the impression that the vape is spitting.
How to fix it
Remove the mouthpiece and wipe it clean with a tissue or cloth.
Regular cleaning helps prevent condensation buildup.
5. Drawing Too Hard
Taking very strong inhales can pull excess e-liquid into the coil chamber, which may lead to flooding and spitting.
How to fix it
Try taking slower, gentler puffs instead of inhaling aggressively.
This allows the coil to vaporise e-liquid more efficiently.
How to Prevent Vape Spitting
Preventing vape spitting usually comes down to proper device maintenance and correct usage.
Helpful tips
-
Avoid overfilling the tank
-
Use the recommended wattage for your coil
-
Clean your vape tank regularly
When to Replace the Coil
If vape spitting continues even after cleaning and adjusting the device, the coil may be worn out.
Older coils can cause flooding because the cotton wick no longer absorbs e-liquid properly.
Replacing the coil is often the easiest solution.
Final Thoughts
Vape spitting is usually caused by excess e-liquid inside the coil chamber. Problems such as flooded coils, low wattage settings or condensation inside the mouthpiece are common causes.
With proper maintenance and correct device settings, most spitting issues can be resolved quickly.
Related Guides
You may also find these helpful: